DESCRIPTION:

Where Used: Suspension component with Type V airdrop platform. Load Capacity: 15,000 lb. suspended load rating. Material: Alloy steel forging, or optionally machining. Weight: Approximately 41 lb. Major Components: Front and back plates, delay timer assembly, lower suspension links, parachute connectors (new unit ships with 4 each), upper suspension link, lanyard with arming wire.

DESCRIPTION:

Where Used: Suspension component, Type V airdrop platform. Load Capacity: 42,000 lb. Major Components: Front and back plates, delay timer assembly, lower suspension links, parachute connectors (8 each), upper suspension link, lanyard with arming wire.  Weight:  Approximately 73 lb.

DESCRIPTION:

Used as a suspension component attached to the Type V airdrop platform. Also used as a platform-to-platform hinge component in certain airdrop configurations and used for emergency aft restraint during airdrop. It is rated for use with platform gross rigged weight up to 42,000 pounds. Major Components: Tandem Link (Machining), 11-1-2799-1, 1 each; Bushing, 11-1-2800, 4 each; Bolt, AN7-24A, 4 each; Nut, MS21083-N7, 4 each; Flat Washer, MS27183-16, 8 each

DESCRIPTION:

Used as a suspension component attached to the Type V airdrop platform. It is rated for use with platform gross rigged weight up to 42,000 pounds. Major Components: Suspension Bracket, 11-1-2799-2, 1 each; Bushing, 11-1-2800, 4 each; Bolt, AN7-24A, 4 each; Nut, MS21083-N7, 4 each; Flat Washer, MS27183-16, 8 each

 Where Used: Extraction system component, Type V airdrop platform. Proof Load: 60,000 lb. Major Components: Latch assembly, 11-1-1725; Actuator assembly, 11-1-1737; Cable assembly: 11-1-2061-1 through –5; Link assembly, 11-1-1715; Link assembly adapter, 11-1-1721; Connector assembly, 11-1-3924

DESCRIPTION:

Where Used: Extraction component of EFTC device for Type V airdrop platform, or, as a suspension sling attachment device. Proof Load: 60,000 lb. Weight: 9 lb. Major Components: 2 each Side Plate, 11-1-1717; 2 or 3 each Spacer, 11-1-1718; 1 each Cam, 11-1-1716 (for EFTC use only); 3 each Locking Nut, MS21083-N16; 3 each Bolt, 11-1-3910-1.

Where Used: Extraction system component - it connects 28-foot extraction parachute; also used to form centerline suspension system with Type V airdrop platform. Major Components: 2 each Side Plate, 66B1883-2; 2 each Large Spacer, 65B3650; 2 each Bolt, 1-inch diameter, 4-inch long, AN17-36A; 2 each Nuts, 1-inch, AN315-15R.

Where Used: Extraction system component - it connects 22-foot extraction parachute; also used to form centerline suspension system with Type V airdrop platform. Major Components: 2 each Side Plate, 66B1883-1; 2 each Large Spacer, 65B3650; 2 each Bolt, 1-inch diameter, 4-inch long, AN17-36A; 2 each Nuts, 1-inch, AN315-15R

Large Clevis

NOMENCLATURE:

Where Used: Suspension component, Type V airdrop platform. Load Capacity: 40,000 lb. Major Components: Clevis forging (drop forged alloy steel); bolt, MS90727-241; nut, MS35691-77. Weight: 7.5 lb. without nut and bolt.

Where Used: Suspension component, Type V airdrop platform. Load Capacity: 20,000 lb. Major Components: Clevis forging (drop forged alloy steel); bolt, MS90727-197; nut, MS35691-61. Weight: 4.3 lb. without nut and bolt.

Length: 11 feet. Where Used: Extraction System Component, Type V airdrop platform. Major Components: 3 each Guillotine Knife, 65C1630 {Each of which is comprised of: 1 each Strap Assembly (body) [comprised of: 1-inch wide woven nylon per MIL-W-27657B, Type I (cancelled), (Note 1: MIL-W-27657 was canceled 3 June 1988 and superseded by AMS 3718), (Note 2: MIL-W-27657B was cancelled May 1997 and replaced with MIL-W-4088, Type XVIII, CL 1A); 3 each Knife Strap Buffers per MIL-W-4088 treated to 27265 condition R}.

Delay: 12-16 seconds. Where Used: M-1 and M-2 parachute release. Major Components: Housing, cover, toggle, keys, pin, mounting block assembly, timer and stem assembly.

Cutter, Propellant Actuated. Diameter: 0.840 inches. Length: 8.50 inches. Delay Time: 4.0 seconds. Unit Weight: 0.31 lb. U.S. Department of Defense Hazardous Material Classification Code: 1.4. Used with standard mounting bracket that is provided on the G-11 series parachute.