|
| |
-
- Multi-Loop Lines
-
These are the Suspension Lines and Extraction Lines.

Line
Bag
NOMENCLATURE:
SLING, EXTRACTION LINE, PANEL (LINE BAG)
DESCRIPTION:
Where Used: Is a universal panel
that stows extraction lines and suspension slings for deployment. One or two
panels are required depending upon their application. The body is made from
nylon duck cloth. Three reinforcement straps are used and are located in the
center and outside of the body at positions 3-1/2-inches from each side of the
body. Three tiedown straps with 12 each tie strap loops are also used and are
located in the center and inside of the body at positions which are the same as
the reinforcement straps. Four strap handles are located on the outside of the
body. Two closing straps are located at each side of the body. Six closing loops
are used; three on the outside and three on the inside of the body. Special
Features: Accommodates extraction line and suspension slings, portable, used
with all approved extraction line for C-130 and C-141 aircraft. Equipment Data:
Weight: 2 lb. Length: 41 inches. Width: 38 inches. Material: Cloth, duck, nylon,
12.5 oz.
NSN: 1670-01-183-2678
PART NUMBER: 11-1-2881
APPLICABLE MILITARY TECHNICAL REFERENCE: TM 10-1670-286-20
|
A-22
Cargo Bag
NOMENCLATURE:
BAG, CARGO, AERIAL DELIVERY, CONTAINER ASSEMBLY, A-22
DESCRIPTION:
Adjustable container consisting of a
sling, a cover, four cover lacing cords, and four suspension webs. Capacity:
2,200 lb. The sling is made of Type VII nylon webbing sewn to a rectangular
scuff pad made from 29.93 ounce cotton duck cloth. The cover is made from 29.93
ounce cotton duck cloth. The cover lacing cords are made of 0.25-inch diameter
Type I cotton cord and are 11 feet long. The suspension webs are made from Type
VIII nylon webbing. Each web is 27.50-inches long with a connector snap fixed at
one end and a D- ring fixed to the opposite end. (Without scuff pad, the part
number is 11-1-1394.)
NSN: 1670-00-587-3421
PART NUMBER: 50B7702
APPLICABLE MILITARY SPECIFICATION/STANDARD: MIL-C-7554
|
Drive-Off
Aid
NOMENCLATURE:
HEAVY DUTY DERIGGING SYSTEM (DRIVE-OFF AID)
DESCRIPTION:
Upgraded version of the
drive-off aid. Where Used: Assist removal of all four-wheeled vehicles from
platform after airdrop. Data: A fabric track constructed of Type X webbing sewn
in a ladder-type configuration. There are two tracks to each system. Each track
is 30 feet long and 22 inches wide and weighs 21 pounds. It is attached to the
Type V platform deck rings using a Type V tiedown clevis or Type X webbing. This
item no longer includes hooks.
NSN: 1670-00-431-8486
PART NUMBER: 11-1-486
APPLICABLE MILITARY SPECIFICATION/STANDARD: MIL-K-44026
|
Type
VIII Webbing
NOMENCLATURE:
NYLON
WEBBING, TYPE VIII
DESCRIPTION:
A narrow fabric, woven or knitted.
Material: Nylon. It is 1-23/32-inches wide, 0.040-0.070-inch thick, weighs 1.60
oz./yd., has a breaking strength of 3,600 lb. and is identified with 2 black
threads in the center.
NSN: 8305-00-261-8585
PART NUMBER: (none)
APPLICABLE MILITARY SPECIFICATION/STANDARD: MIL-W-4088
|
Type
XXVI Webbing
NOMENCLATURE:
NYLON WEBBING, TYPE XXVI
DESCRIPTION:
A narrow, flat fabric, woven or
knitted. Material: Nylon. It is 1.75 inches wide, 0.150-0.180 inches thick,
weighs 4.90 oz./yd., has a minimum breaking strength of 15,000 lb. and is
identified by two yellow threads in the center.
NSN: 8305-01-206-9219
PART NUMBER: (none)
APPLICABLE MILITARY SPECIFICATION/STANDARD: MIL-W-4088
|
1-inch
Tubular Nylon
NOMENCLATURE:
TUBULAR
NYLON, 1-IN, 4,000-LB.
DESCRIPTION:
A narrow fabric, woven or knitted. It
is 1.00-inch wide, 0.120-inch thick, weighs 1.70 oz./yd., has a minimum breaking
strength of 4,000 lb. and is identified with one black thread (dyed) in the
center.
NSN: 8305-00-268-2455
PART NUMBER: (none)
APPLICABLE MILITARY SPECIFICATION/STANDARD: MIL-W-5625
|
1/2-inch
Tubular Nylon
NOMENCLATURE:
TUBULAR NYLON, 1/2-INCH, 1,000 LB.
DESCRIPTION:
A narrow fabric, woven or knitted. It
is 0.50-inch wide, 0.090-inch thick, weighs 0.50 oz./yd., has a breaking
strength of 1,000 pounds, and is identified with one black thread (dyed) in the
center.
NSN: 8305-00-268-2453
PART NUMBER: (none)
APPLICABLE MILITARY SPECIFICATION/STANDARD: MIL-W-5625
|
Type
III, 550 Cord
NOMENCLATURE:
NYLON
CORD, TYPE III, 550-LB.
DESCRIPTION:
A fibrous, braided, cordage item with
a minimum breaking strength of 550 pounds, a 30 percent elongation, 0.188-inch
diameter and linear weight is 75 yd./lb.
NSN: 4020-00-240-2146
PART NUMBER: (none)
APPLICABLE MILITARY SPECIFICATION/STANDARD: MIL-C-5040
|
1/4-inch,
80-Lb. Cotton Webbing
NOMENCLATURE:
COTTON
WEBBING, 1/4-IN, 80-LB
DESCRIPTION:
A narrow, flat, fabric, woven (plain
weave) or knitted. Made of cotton. It is 0.25-inch wide, weighs 0.11 oz./yd. and
has a minimum breaking strength of 80 lb.
NSN: 8305-00-268-2411
PART NUMBER: (none)
APPLICABLE MILITARY SPECIFICATION/STANDARD: MIL-T-5661
|
|